Pool Finder Plus Device
Long range Water Finder
1) On the Device By ON- OFF Switch
2) Start the Device by pressing the start button on the keypad
3) The Device Works on 3 Languages ( German, English,French) Select your option by OK Button on the keypad.
4) After Selecting the language water type will appear on display, you can select Natural (or) Salt water by pressing up (or) down button on the keypad.
5)After Selecting water type, The range will appear on display you can select between (500M / 1000M / 1500M / 2000M) For Example (Choose 1000M by pressing UP (or) DOWN buttons on the keypad.
6) Increase the receiving antenna length to get more signal strength
7) After Selecting the range, the search screen will appear Which will start the device will give beep sound
8)The user should position towards north while starting.
9) Start the searching by holding the device
a) If the target is on the right side means the device will turn right side
b) If the target is on the left side means the device will turn left side
c) When you pass the target the device will turn to the back
d) Then you can stop & point the target 1M square
e) After Detecting the target confirm the target from each direction.
f) To determine the depth of the target stand above the target and turn 45 degrees and walk straight a head until the device reverse to back.
g)Measure the distance between the device turning back point to the starting point
h) Multiply the measuring distance into 10
For Example: The Distance between center point and the device turning point is 20 feet than the depth will be 20 feet x 10 =200 feet is the depth.
When you move on to the center point by closing the receiving antenna the device will rotates in the circular motion